Squonk Mods: Recent, New, and Coming

Discussion in 'All Things Squonk' started by TheWestPole, Jun 26, 2017.

  1. muth

    muth More than a poop!

    If you find out anything would you mind posting? Thx
     
  2. Darren

    Darren Active Member

    Bf ing a Noisey Cricket v2 (25mm) version

    Its a Work in progress ?

    Need to cut front of mod for Sqounking with,

    Then find an effective way of connection from bottle to 510 pin, That allows removal of bottle,

    Options I've come up with
    By one of 2 ways

    1/ metal tube connected to 510 pin to slot within bottle like other mods ? That allows connection of bottles to 510 feed tube ?

    2/ inbox bottle (clear softer ones) by drilling out silicone cap , installing tube inside bottle to halfway through the cap , then using top half of cap to slot onto base of 510 tube ,

    Like last pic but with tube inside bottle to feed juice , from inbox bottles with cap on.

    Once Sqounker hole is cut within mod this will allow access to bottle to grip to pull out of mod.

    But is working on single cell now with new BF 510 installed
    Hits like it normally does in P mode
    As a Switchfet type single cell mod ,

    Just like the small compact size and shape of this mod , dont need a dual high powered mod since most my BF atties are single coil and awaiting the new 22mm flave RDA clone to ship previously only 24mm in clones,

    The side voltage switch wont work but left it in so not got a hole in side of mod [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Sent from my ONEPLUS A3003 using Tapatalk
     
    • Like Like x 2
    • Love This! Love This! x 2
    • List
  3. muth

    muth More than a poop!

    Great Pix, thx! I guess you saw Tim's BF conversions in previous posts with other mods? Love watching this stuff in progress:)Where did you get that white bottle cap, right above ^?
     
  4. Darren

    Darren Active Member

    Bottle caps come with the Inbox bottles , i bought a load of the clear silicone bottle s , for inbox not sure if they where made for Magic box or something , but same shape size as original inbox but they are softer and clear colour,

    Sent from my ONEPLUS A3003 using Tapatalk
     
    • Like Like x 1
    • Informative Informative x 1
    • List
  5. ghost62

    ghost62 Goes Blip In The Night Staff Member Moderator Vendor Safe Zone Moderator

    Very nice
     
  6. Darren

    Darren Active Member

    Finshed well needs some buffing light sanding to remove a scratch
    Pretty thick mod walls too so went through a few discs cutting ,

    Used mod maker feed tube metal onto 510 , so can just slot a bottle in
    Mosfet type board , has On /Off switch via fire button , so can go in my pocket small compact an solid little mod , [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Sent from my ONEPLUS A3003 using Tapatalk
     
    • Love This! Love This! x 2
    • Like Like x 1
    • List
  7. muth

    muth More than a poop!

    Nice work using discs! Couldn't have been easy.
     
  8. Darren

    Darren Active Member

    It wasnt , but managed then finished off with a file and sand paper,

    Sent from my ONEPLUS A3003 using Tapatalk
     
  9. Darren

    Darren Active Member

  10. TheWestPole

    TheWestPole A hit on Mr. Mitty

    Turns out the Vandy Vape Pulse 80W Squonker will NOT GET THE GENE CHIP. Too bad. Fair warning.


    [​IMG]


     
    • Informative Informative x 2
    • Thanks Thanks x 1
    • List
  11. Darren

    Darren Active Member

    But other news Voopoo will release a very similar mod with that chip so not all bad news

    Sent from my ONEPLUS A3003 using Tapatalk
     
  12. Darren

    Darren Active Member

    Got my pelso V3 an caps in
    An sets of clapton clamps ,
    Now to decide if im getting the jorda B rda or not before it disappears out of stock [​IMG]

    Sent from my ONEPLUS A3003 using Tapatalk
     
  13. Darren

    Darren Active Member

    So popped a build in Pelso V3 RDA
    Went single coil on single 3mm Airflow hole ,
    Blk Delrin top cap
    Delrin tip ,
    Build framed Staple NI80
    2/28 4/1* 3/36 3mm ID from a box lazy Iknow , but there good,

    Testing on SD nano DNA 60,
    Started at 0.18 ohms after pluses strumming an Wicking settled @0.31 0.32 ohm, which is what they where advertised @, .32
    Nice dence vape 21w

    Popped on to sqounker an Wow Rowdy as hell , probably hitting
    @ 40w plus on there,
    Liking the tip an topcap will try cloud cap later if i like might pick up some others ,

    building is easy once you put the clamps on for larger builds

    Has big open deck for single coil build ,
    Or a dual coil
    have option for going other side of posts for a micro build single coil too
    Tried packing deck out with cotton to fill in as much as i could.

    Results i likie nice RDA with added option will try more builds later but only just had the time to throw this build in there ,


    Not the cheapest RDA especially with extras .

    Now deciding on if to take a chance on jorda B RDA
    [​IMG][​IMG]

    Sent from my ONEPLUS A3003 using Tapatalk
     
  14. TheWestPole

    TheWestPole A hit on Mr. Mitty

    Darren, it would be more helpful to post these in the Squonk Atty thread:

    http://vapingblips.com/threads/squonk-attys-recent-new-and-coming.2707/
     
  15. Darren

    Darren Active Member

    Has anyone any news on the 3 new Marvec sqounker mods ones mech , one is dna 75
    Other is 75C
    Yeah sorry about last post wrong thread [​IMG]

    Sent from my ONEPLUS A3003 using Tapatalk
     
  16. muth

    muth More than a poop!

    Really liking the delrin top cap. Nice coil, too. Nothing wrong with buying that. I have one similar with 40g wrap. I'm not going to, anytime soon, handmake a coil like that. Thx for the pix:)
     
  17. muth

    muth More than a poop!

    Say what? Did you watch the vid? I can wait rather than support the Poopoo Mod. They'll be more options coming down the pike.
     
  18. muth

    muth More than a poop!

    After seeing that I'll wait for other options. I'm not supporting Poopoo.....little shits:glare:
     
  19. TheWestPole

    TheWestPole A hit on Mr. Mitty

    Who knows, the substitute chip could be perfectly fine. But yeah, wait for it to ship and be reviewed. Lightweight plastic plus regulated is an attractive combo IMO.
     
  20. Darren

    Darren Active Member

    All this drama just pushes me more towards Switchfet
    mods
    But i guess the will be 250c bf mods on the horizon an 75c will get the replay features , so the marvec priest 75c for 100usd looks a good one too just wish it had no writing on the side

    Sent from my ONEPLUS A3003 using Tapatalk