1. Hello Guest,

    VapingBlips.com is a social community of vapers gathering to discuss all things vaping and life in general. We have contests, play games, babble about nonsense and even share useful info about vape gear, e-liquids and DIY info.

    We have no interest in spammers or trolls and our members have tools that allow them to remove offending posts if enough members rate it as spam or trolling.

    We hope you like what you see and decide to register and join us.

    If you have any questions, feel free to send an e-mail to [email protected] and we hope to see you soon ;)

Lauched!Original Vandy Vape Mato RDTA with BF Pin

Discussion in 'Vendors' started by Gina, Feb 21, 2020.

  1. Gina

    Gina Seriously Committed Vendor

    Hi, guys! Welcome to New Product Introduction! I have a question: do you need a RDTA at present? Today let me introduce you one RDTA named Original Vandy Vape Mato RDTA with BF Pin. Now let’s take a closer look at the RDTA below.

    The Vandy Vape MaTo RDTA combines the best of RDA and RTA and cuts an extremely good figure. As usual with a top coiler, the coiling deck is mounted above the tank, which is of great benefit to the taste. The MaTo is also able to boast dense, compact steam even with moderate battery power from 45 watts.
    A real highlight is the airflow system. The tank is designed for DL (Direct Lung), but at the same time the draw resistance is clearly noticeable even with the airflow completely open. Before reaching the coil, the air is guided through 13 small holes on each side and swirled. This technology further intensifies the taste.

    [​IMG][​IMG]

    Main Features:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Have you worried about that you not know enough about the product?
    Don't worry,this time we present to you the introduction video.



    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
     
  2. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
     
  3. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
     
  4. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
     
  5. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
     
  6. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,
    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
     
  7. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now at 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Mechanical Mod maybe you need:
    3FVAPE - Mechanical Mod >>>

    Vaping accessories you would like:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
     
  8. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:
    [​IMG]

    Description:
    A real highlight is the airflow system. The tank is designed for DL (Direct Lung), but at the same time the draw resistance is clearly noticeable even with the airflow completely open. Before reaching the coil, the air is guided through 13 small holes on each side and swirled. This technology further intensifies the taste.

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>

    Vaping accessories maybe you need:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    Mechanical Mod you would like:
    3FVAPE - Mechanical Mod >>>
    ------------
    Dear customer,
    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
     
  9. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:
    [​IMG]

    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>

    Vaping accessories maybe you need:
    3FVAPE - Misc >>>
    3FVAPE - Coil >>>

    More Original Vandy Vape products are in stock now:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,
    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
     
  10. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in pre-order now on 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>

    Bottom Feeder vaping equipments:
    3FVAPE - Squonk >>>

    More Original Vandy Vape products are available on 3FVAPE:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.
     
  11. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:
    [​IMG]

    Description:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Mechanical Mod you would like:
    3FVAPE - Mechanical Mod >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  12. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Wick & Coil:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>

    More Original Vandy Vape products are available:
    3FVAPE - Original Vandy Vape >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  13. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in pre-order now on 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Bottom Feeder equipments:
    3FVAPE - Squonk >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  14. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:
    [​IMG]

    Description:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>
    ------------
    Dear customer,

    Due to the Coronavirus affected, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  15. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Have you ever worried about that you not know enough about the product?
    Don't worry,this time we present to you the Original Vandy Vape Mato RDTA with BF Pin unboxing video.



    Is this video done some help to you?
    Check the product page at 3FVAPE to find more:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>
    ------------
    Dear customer,

    Due to the Coronavirus effect, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  16. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:
    [​IMG]

    Parameters:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    We can ship these items in 24hrs after payment confirmed on business day.

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Wick & Coil:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>
    ------------
    Dear customer,

    Due to the Coronavirus affected, we're sorry that shipping time of some products will be delayed.
    If you want quick shippment, please choose products with 24HRS tag which can be shipped in 24 hours after payment confirmed on business day.
    Quantity limited, first order gets first! Using the filters to browse/locate products quickly.

    Click the links below to enter "Ship in 24hrs" page:
    3FVPAE - 24hrs >>>

    Tips:
    Include products in "Ship in 24hrs" zone in one separated order to get quick shipment. Otherwise your order may wait for other products not in this zone.

    Tips For Self-Protection From Covid-19 >>>
     
  17. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    Good news!
    The Original Vandy Vape Mato RDTA with BF Pin is in stock now on 3FVAPE.

    Let's check the Scene Photo:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    We can ship these items in 24hrs after payment confirmed on business day.

    If you want to get one, you can come here:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Mechanical Mod you would like:
    3FVAPE - Mechanical Mod >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>
    -------------------
    3FVape 2020 Easter Sale Information
    Time: 00:00:00 April 10th 2020 - 23:59:59 April 12th 2020 (MDT)
    Offer: Site-wide 5% OFF + Extra Gift
    Coupon code: Easter2020

    Tips For Self-Protection From Covid-19 >>>

    Hygiene products for anti Covid-19 >>>
     
  18. Gina

    Gina Seriously Committed Vendor

    Hey there mates.
    What an exciting news!
    Today we're gonnoa introduce Original Vandy Vape Mato RDTA with BF Pin to you.

    Let's check it now:
    [​IMG]

    Description:
    Model: Mato
    Product Type: Rebuildable Atomizer
    Coil Rebuildable: Coil Rebuildable
    Material: Stainless Steel
    Drip Tip: With Drip Tip
    Thread Type: 510
    Airflow: Adjustable Airflow
    Capacity: 5.0ml
    Coil Replaceable: Non-Replaceable Coil
    Package: 1 x Vandy Vape Mato RDTA, 1 x Spare parts bag, 1 x Instruction manual, 1 x Coil lead guide,1 x Squonk pin, 1 x Triple Fused Clapton Coil 0.26ohm

    We can ship these items in 24hrs after payment confirmed on business day.

    Purchase it on 3FVAPE:
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>

    Replacement Wick, Wire, Mesh & Cotton:
    3FVAPE - Wick, Wire, Mesh >>>
    3FVAPE - Cotton >>>
    -------------------
    Tips For Self-Protection From Covid-19 >>>

    Hygiene products for anti Covid-19 >>>
     
  19. Gina

    Gina Seriously Committed Vendor

    Hello everyone.
    So nice to see you guys again.
    Still remember the Original Vandy Vape Mato RDTA with BF Pin?
    Today I wanna share a photo of it with you guys.

    Let's have a look:
    [​IMG]

    Main Info:
    510 threading connection;
    Material: stainless steel, heat-resistant PSU;
    Dimensions:24 x 54.5mm (including. drip tip) / 24 x 44.6mm (without drip tip)
    Deck: Single coil (postless);
    Capacity: 5.0ml;
    Inhalation method: DL (Direct Lung);
    Positive Pin: adjustable;
    Very good processing quality;
    Excellent taste;
    Slightly restrictive draw;
    Honeycomb airflow with 13 holes per side;
    Dense, compact steam;
    Easy to coil;
    Large space for up to 6mm thick wires;
    Clean filling
    With squonker / BF / bottom feeder pin
    Outer diameter: 24mm

    We can ship these items in 24hrs after payment confirmed on business day.

    Click here, order it now on 3FVAPE
    Original Vandy Vape Mato RDTA with BF Pin >>>

    Bottom Feeder equipments you would like:
    3FVAPE - Squonk >>>

    Replacement Parts:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) >>>
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) >>>

    Replacemet Drip Tips:
    Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip >>>
    -------------------
    Tips For Self-Protection From Covid-19 >>>

    Hygiene products for anti Covid-19 >>>