istick

Discussion in 'I Need Help!!!' started by Roguexx, May 6, 2015.

  1. Roguexx

    Roguexx blippy blipperson

    So I bought a new coil. Popped it in. Soaked it. Ready to go. Istick 30w says atomizer low. Won't fire. Checked threading. Tightness in coils. Connections still says it. Just a bad coil maybe or it's my stick going?
     
  2. moecat

    moecat No sodding blips to give

    I think it won't work if the resistance is below 0.4 ohms. Not 100% sure about that, though.
     
  3. Just Me

    Just Me BiTcHy Blip

    Happened to me once it was the coil
     
  4. Roguexx

    Roguexx blippy blipperson

    Ok out it's a .5 coil.
     
  5. moecat

    moecat No sodding blips to give

    Like @Just Me says, probably just a bad coil. Those pre-built/packaged things aren't always too reliable.
     
  6. Just Me

    Just Me BiTcHy Blip

    I use the 1.2 they work a lot better. I also clean the threads atleast once a week with a qtip and alcohol.
     
  7. Roguexx

    Roguexx blippy blipperson

    I bought a New .5 coil and worked like a charm
     
  8. redrover

    redrover New Member

    iSticks are notorious for this problem. If you never had this problem before, then it can be a faulty coil or there is a connection issue.